|
UV
Stamps
The UV
Stamp is made to out last any other conventional rubber stamp
when using UV Re-admission inks. It comes with a lifetime
warranty and is primarily a custom stamp.
|
UVP
has a large selection of high intensity and display type ultraviolet
lamps to accommodate many applications and budgets. Refer to Ultraviolet
Hand Lamps section for smaller scale lamp models. |
Bench
and Display UV Lamps
Dimensions:
18.5"L x 4.75"W x 5"H (470 x 114 x 89mm)
|
Mineralight
Display Lamps
Display
lamps use two 25-watt high performance tubes providing
hours of UV illumination for fluorescence, sterilization
or inspection applications. Each lamp comes with adjustable
handles and mounting bracket for hanging.
UVL-225D
365nm UV 95-0190-01(115V) / 95-0190-02 (230V)
UVS-225D 254nm UV 95-0191-01(115V)/95-0190-02(230V)
UVM-225D 302nm UV 95-0189-01(115V)/95-0189-02(230V)
UVLS-225D 365/254nm 95-0192-01(115V)/95-0192-02(230V)
|
|
UVGD-68
Display Lamp
This
shortwave, high intensity UV lamp is excellent for large
scale display of minerals. Lamp grid is rated at 20,000
hours of use. Adjustable handles/brackets are supplied
for easy mounting.
|
|
XX-Series
Display/Bench Lamps
Bench
lamp line is expanded to offer a complete selection
of models -- fixture only or two tubes each of the following
wavelengths: longwave, BLB (black light blue), shortwave
or midrange. Products for use with the XX-15 Lamps include:
Filter covers and clear covers can be attached the lamp.New
XX-20 series and XX-40 Bench Lamps offer a greater area
of illumination.
Models
are available with either BLB or shortwave UV. The Sterilaire
shortwave models are designed to use in sterilization
applications.
|
|
Exposure
Stand
The
XX-15 Lamp connects to the new Exposure Stand which
provides a platform for UV fluorescence experimentation.
The shelf is adjustable to different levels for repeatable
exposure of samples.
|
|
BL-15
Illumination Lamps
This
longwave UV lamp is ideal for inspection applications
in inaccessible places.
|
|
R-52
Grid Lamp - Shortwave UV
The
R-52 Grid Lamp's uniform source of high-intensity shortwave
UV is for applications including bacteria destruction,
sterilization and photochemistry. A filter assembly
can be easily attached to convert this lamp for fluorescent
analysis. UVP's special UVG shortwave filter reduces
solarization, prolonging the filter life. Lamp mounts
securely in its transformer base or detach the lamp
for movement around your work area. Primary electrical
cord: 8 feet (2.4m) and secondary electrical cord: 3
feet (0.9m).
|
High
Intensity Longwave UV Lamps
High
intensity ultraviolet lamps are available with the Cool-Touch
heat-resistant housing (B-100AP, B-100AP/R, B-100SP, B-100YP,
B-100EP) or the metal fabricated lamp housing (B-100A, B-100A/R,
B-100Y). See below for additional specifications.
|
B-100SP
Model
B-100SP comes with a self-ballasted 160 watt longwave
bulb. Other features include:
Cool-Touch plastic, heat-resistant lamp housing and
pistol-grip handle Special bulb protector. On/off switch
located on the handle. This lamp is recommended for
use in leak detection applications.
|
|
B-100AP
Models
feature same longwave UV and Cool-Touch housing and
spot bulb and ballast base. Lamp head can rotate 360
degrees when attached to the base for hands-free operation
or lamp can be removed from the base. 8 ft primary and
secondary cords. B-100AP/R (not shown) offers a longer
cord lengths - 20 foot (6.1m) primary and secondary
cord lengths. Accessories: Finger guard, lamp funnel,
lamp visor.
|
|
B-100A
The
longwave B-100A is manufactured with a scratch-resistant
aluminum housing which connects to ballast base with
an 8 foot cord; 8 foot secondary cord is included. Accessories:
Lamp Visor
|
|
B-100Y
and B-100YP (picture shown)
Models
feature a yellow filter which blocks wavelengths shorter
than 500nm and produces three strong mercury lines at
543, 574 and 576nm. B-100Y is built with the aluminum
housing; B-100YP plastic housing. Excellent for semiconductor
wafer inspection as most photoresist absorption occurs
below 450nm.
|
|
|
|
Hand
stamping is a preferred method of readmittance control and beverage
control at many amusement parks and nightclubs. A Blak-Ray ultraviolet
lamp is used with readmission inks to regulate access. In the
case of readmittance control, an attendant stamps the hands of
patrons who wish to leave the premises and return a short time
later. In the case of beverage control, patrons of drinking age
typically have their hands stamped to differentiate them from
minors. |
|
|
Recommended
Ultraviolet Lamps
The
high intensity model B-lOOAP is popular in high-patronage clubs
and for outside use in amusement parks. The B-100 AP's patented
Cool-Touch lamp housing is safe to touch so patrons and personnel's
fingers will not be burned. The Fingerguard is recommended for
readmission use to avoid contact with the bulb.
|
|
UVP's high-quality, wide style XX-1 SBLB Lamp
is designed to illuminate large access areas. This fixture can
be conveniently mounted on a wall or hung from the ceiling.
An optional clear filter cover protects the tubes. The XX-40
illuminates a broader expanse. The 6-watt UVL-56 used in conjunction
with the J-129 lamp stand and the 4-watt UVL-21 with the J-124
1amp stand are popular for use at indoor establishments. When
complete portability is required, UVP's ML-49 6-watt lamp operates
off two 6-volt lantern batteries (or two rechargeable batteries
and charger), and the UVL-26P operates from its internal lead-acid
rechargeable battery. For beverage control, bar personnel frequently
use the convenient 4-watt UVL-4 lamp. This lightweight lamp
is small enough to slip in a shirt pocket or carry on a cocktail
tray. The UVL-4 operates off 4 standard AA batteries.
|
|
MODEL |
Blak-Ray
Readmission Inks |
|
Blak-Ray
Readmission Inks
Ordinary
inks can be transferred to another person's hand or imitated
with an ink pen. When confronted with a crowd at the entrance
(or bar) readmittance attendants (or bartenders) using other
control inks and methods can be less than thorough in their
inspection techniques and admit (serve) people with forged stamps
causing potential security problems. Blak-Ray lamps and inks
help eliminate that problem, allowing personnel to quickly and
accurately inspect each stamp.
|
|